66 Mustang Restoration

1966 Fender Mustang Restoration: Restoring the Pickguard

As I detailed last time, I discovered the pickguard had at least two layers of paint. The thick green layer on top and what appeared to be red spraypaint underneath. I hoped that under all of that was the original white tortoiseshell pickguard, but I wasn’t sure what state it was in. I feared that whoever decided it was a good idea to paint it had also decided to rough it up to help make the paint stick.

After a few hours researching online, I had no clear winner on the best way to proceed. The most common suggestion was to lightly sand my way down through the layers and then buff out any scratches afterward. This made me very nervous, so wanted to explore some other avenues first. (more…)

1966 Fender Mustang Restoration: Taking Stock

First things first, I need to see what I’ve got myself into here.

The good news is it seems reasonably complete. It’s missing one pickup cover, one tuning peg, and the tremelo arm, but otherwise everything else is there. Too early to declare how much of it is original, but we’ll uncover that as we go.

The fretboard seems in reasonable condition with only a little wear. Still very playable. I can’t see any signs of a refret, but if it has been, it was a very good job. I suspect maybe the paint job is an old one and it hasn’t been played much since…can’t imagine why 🙂 (more…)

1966 Fender Mustang Restoration

It might be hard to believe, but this is a 1966 Fender Mustang.

What’s that? You don’t think Fender were doing black bodies and surf green scratch plates in 1966? I think you’re right.

At some stage in the years between leaving Fender and being rescued by me, someone has taken to it with a paintbrush and “updated” it.  I came across it a couple of years ago, almost overlooking it given the dodgy colours. Pretty much on the spot I decided it needed to be put back to its original state. (more…)